KREVO Seal PU-GG
High-performance polyurethane civil engineering joint sealant · One component · Elastic, non-sag
- Type
- PU Sealant GG
- Pack sizes
- 600 mL foil pack; 20 packs per box
- Shelf life
- Original sealed packs; dry, shaded, +5 °C to +25 °C
See it applied
Sealing glass facade joints
How KREVO Seal PU-GG goes on site, step by step.
- 1 Clean the joints
- 2 Gun-apply the sealant
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Seal PU-GG is a one-component, moisture-curing, elastic polyurethane sealant intended for movement and connection joints in heavy-duty civil and industrial environments. The system combines joint movement accommodation with mechanical durability and resistance to selected service chemicals. It is suitable for horizontal and vertical joint sealing when substrates and joint geometry are properly prepared.
Advantages
- Elastic joint sealing with a nominal movement capability of ±35%.
- Good adhesion to prepared concrete, masonry and a range of construction substrates.
- Resistant to water, seawater and certain diluted chemicals, diesel and jet fuel.
- Non-sag, single-component material for floor, vertical and overhead joints.
- Solvent-free, low-emission formulation intended for demanding service conditions.
Typical uses
- Industrial and warehouse floors
- Traffic and pedestrian areas
- Parking decks
- Production areas
- Civil engineering movement and connection joints
- Sewage treatment plants
- Tunnels
- Vertical and overhead construction joints
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Seal PU-GG
1.35 kg/L
Density
-40 °C to +70 °C
Service temperature
37 (28 days)
Shore A hardness | ISO 868
600%
Elongation at break | ISO 37
90%
Elastic recovery | ISO 7389
8 N/mm
Tear propagation resistance | ISO 34
±35%
Movement capability | ASTM C719
Product information
- Material type
- One-component, moisture-curing, elastic polyurethane sealant
- Appearance / colour
- Concrete grey; additional colours subject to availability
- Application surfaces
- Prepared concrete, masonry and compatible construction materials
- Storage
- Original sealed packs; dry, shaded, +5 °C to +25 °C
- Shelf life
- 15 months when stored as specified
- Secant tensile modulus | ISO 8339
- ~0.60 MPa at +23 °C; ~1.10 MPa at -20 °C
FAQ
KREVO Seal PU-GG: questions
What is KREVO Seal PU-GG?
KREVO Seal PU-GG is a one-component, moisture-curing, elastic polyurethane sealant intended for movement and connection joints in heavy-duty civil and industrial environments. The system combines joint movement accommodation with mechanical durability and resistance to selected service chemicals. It is suitable for horizontal and vertical joint sealing when substrates and joint geometry are…
What is KREVO Seal PU-GG used for?
KREVO Seal PU-GG is used for: industrial and warehouse floors; traffic and pedestrian areas; parking decks; production areas; civil engineering movement and connection joints; sewage treatment plants; tunnels; vertical and overhead construction joints.
How is KREVO Seal PU-GG applied?
In outline: 1. Clean the joints 2. Gun-apply the sealant. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Seal PU-GG available in?
KREVO Seal PU-GG is supplied in 600 mL foil pack; 20 packs per box.
What is the shelf life of KREVO Seal PU-GG?
Shelf life / storage: Original sealed packs; dry, shaded, +5 °C to +25 °C.
Is there a technical data sheet for KREVO Seal PU-GG?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Waterproofing
Cementitious Coating
Waterproofing
KREVO Proof Cem-Flex
Two-component polymer-modified cementitious waterproofing slurry · Brush or trowel applied
View product
Polyurethane Acrylic
Waterproofing
KREVO Proof PU-Acryl
One-component polyurethane-acrylic liquid waterproofing membrane · UV-resistant roof coating
View product
Acrylic Coating
Waterproofing
KREVO Proof Acryl
Flexible single-component acrylic waterproofing membrane · UV- and weather-resistant roof coating
View product