KREVO Plug Rapid
Ultra-rapid-setting water-stopping mortar · Single-component · Active leak plugging
- Type
- Water Plug
- Pack sizes
- 25 kg bags / Bucket
- Shelf life
- Dry, shaded conditions below +25 °C
See it applied
Injecting basement cracks
How KREVO Plug Rapid goes on site, step by step.
- 1 Stop active leaks
- 2 Inject the cracks
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Plug Rapid is an ultra-fast-setting, single-component cementitious mortar for stopping active water leaks and sealing local openings in concrete, masonry and stone. A dry, grey powder based on chloride-free rapid-setting hydraulic cements and silica sand, it can be applied as a compacted dry powder or mixed with water for immediate placement.
Advantages
- Rapid initial set for emergency leak-stopping and local sealing works.
- Suitable for dry-powder application or hand-mixed placement at active leaks.
- Chloride-free cement-based composition with durable, water-resistant finish.
- No noticeable solvent odour or fumes during normal use.
- Single-component material requiring only clean water for the wet method.
Typical uses
- Active leaks at construction joints
- Form-tie holes
- Water-bearing cracks
- Wall kickers
- Honeycombed concrete
- Manholes
- Service connections
- Water tanks and masonry structures
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Specification
- Material type
- Single-component, ultra-rapid-setting cementitious water-plugging mortar
- Composition
- Rapid-setting chloride-free hydraulic cements and silica sands
- Appearance / colour
- Dry grey powder
- Application method
- Dry application or wet hand-mixed mortar
- Typical wet mixing proportion
- 3-4 parts powder to 1 part clean water, by volume
- Storage conditions
- Dry, shaded conditions below +25 °C
- Shelf life
- 6 months when correctly stored in unopened packaging
- Initial setting time | Vicat
- 60-120 seconds at +25 °C
- Compressive strength | ASTM C109
- 28 MPa at 28 days
- Water-to-powder ratio
- Approximately 0.20 (for strength-test specimens)
- Volatile organic content (VOC)
- < 10 g/L
Used together with
Leak sealing and crack injection
KREVO Plug Rapid is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.
-
1Stop active leaks
KREVO Plug Rapid
This product
-
2Inject the cracks
FAQ
KREVO Plug Rapid: questions
What is KREVO Plug Rapid?
KREVO Plug Rapid is an ultra-fast-setting, single-component cementitious mortar for stopping active water leaks and sealing local openings in concrete, masonry and stone. A dry, grey powder based on chloride-free rapid-setting hydraulic cements and silica sand, it can be applied as a compacted dry powder or mixed with water for immediate placement.
What is KREVO Plug Rapid used for?
KREVO Plug Rapid is used for: active leaks at construction joints; form-tie holes; water-bearing cracks; wall kickers; honeycombed concrete; manholes; service connections; water tanks and masonry structures.
How is KREVO Plug Rapid applied?
In outline: 1. Stop active leaks 2. Inject the cracks. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Plug Rapid available in?
KREVO Plug Rapid is supplied in 25 kg bags / Bucket.
What is the shelf life of KREVO Plug Rapid?
Shelf life / storage: Dry, shaded conditions below +25 °C.
Is there a technical data sheet for KREVO Plug Rapid?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Injection System
PU Injection Permanent
Injection System
KREVO Inject PU-Flex
Two-component flexible polyurethane injection resin · Elastic sealing of concrete cracks and leaking joints
View product
PU Injection Temporary
Injection System
KREVO Inject PU-Foam
Water-reactive two-component polyurethane injection foam · Rapid stopping of active leaks
View product
Cementitious Injection
Injection System
KREVO Inject MicroCem
High performance ultra-fine injection cement · Concrete and geotechnical grouting
View product