Skip to content
Krevo
KREVO Carbon Lamination EP
CFRP Systems

KREVO Carbon Lamination EP

Solvent-free, Epoxy lamination resin · Carbon-fibre fabric impregnation

Type
Wrap Adhesive
Pack sizes
5 kg complete packs
Coverage
0.6–0.8 kg/m²; actual consumption depends on the lay-up
Shelf life
12 months; store dry, shaded and below +35 °C
Technical data sheet

See it applied

Wrapping a column with carbon fibre

How KREVO Carbon Lamination EP goes on site, step by step.

  1. 1 Saturate with lamination epoxy
  2. 2 Wrap the carbon fabric

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Carbon Lamination EP is a two-component, solvent-free epoxy resin system specified for impregnating KREVO Carbon Fabric strengthening fiber. Its semi-thixotropic consistency supports thorough fibre wet-out and helps minimise drainage and sag during application to vertical or horizontal structural surfaces. The cured fabric-resin laminate is designed to provide high-strength reinforcement and durable performance.

Advantages

  • Solvent-free formulation with zero-VOC performance specification.
  • Semi-thixotropic resin for effective fabric impregnation and controlled sag.
  • High-strength epoxy system with strong bonding characteristics.
  • Suitable for vertical and horizontal reinforcement applications.
  • Available in Standard and Tropical grades for different working conditions.

Typical uses

  • Impregnation and bonding of compatible carbon-fibre reinforcement fabrics
  • Wet lay-up reinforcement of structural members
  • Beam and column strengthening
  • External composite reinforcement on vertical and horizontal surfaces

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Carbon Lamination EP

45 MPa

Tensile strength | 7 d / +20 °C

60 MPa

Flexural strength | 7 d / +20 °C

1.67 GPa

Compressive modulus | 7 d / +20 °C

65 °C

Glass transition temperature

Product information

Chemical base
Two-component, solvent-free epoxy resin and hardener
Formulation
Semi-thixotropic impregnation and lamination adhesive
Available grades
Compatible
Application
Wet lay-up resin for compatible carbon-fibre strengthening fabrics
VOC
Zero VOC — specified formulation characteristic
Theoretical coverage
0.6–0.8 kg/m²; actual consumption depends on the lay-up
Shelf life / storage
12 months; store dry, shaded and below +35 °C

Used together with

Concrete repair and strengthening system

KREVO Carbon Lamination EP is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Bonding coat

  2. 2Repair mortar

  3. 3Carbon fibre wrap

    KREVO Carbon Lamination EP This product KREVO Carbon Fabric CFRP Fibre Wrap
  4. 4Protective top coat

FAQ

KREVO Carbon Lamination EP: questions

What is KREVO Carbon Lamination EP?

KREVO Carbon Lamination EP is a two-component, solvent-free epoxy resin system specified for impregnating KREVO Carbon Fabric strengthening fiber. Its semi-thixotropic consistency supports thorough fibre wet-out and helps minimise drainage and sag during application to vertical or horizontal structural surfaces. The cured fabric-resin laminate is designed to provide high-strength reinforcement and…

What is KREVO Carbon Lamination EP used for?

KREVO Carbon Lamination EP is used for: impregnation and bonding of compatible carbon-fibre reinforcement fabrics; wet lay-up reinforcement of structural members; beam and column strengthening; external composite reinforcement on vertical and horizontal surfaces.

How is KREVO Carbon Lamination EP applied?

In outline: 1. Saturate with lamination epoxy 2. Wrap the carbon fabric. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Carbon Lamination EP available in?

KREVO Carbon Lamination EP is supplied in 5 kg complete packs.

What is the coverage of KREVO Carbon Lamination EP?

Coverage / consumption: 0.6–0.8 kg/m²; actual consumption depends on the lay-up. Actual consumption depends on the substrate and application; see the technical data sheet.

What is the shelf life of KREVO Carbon Lamination EP?

Shelf life / storage: 12 months; store dry, shaded and below +35 °C.

Is there a technical data sheet for KREVO Carbon Lamination EP?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Carbon Lamination EP