KREVO Shield PU-Top
High-gloss aliphatic acrylic polyurethane topcoat · Weather-resistant protective finish · Steel coating systems
- Type
- PU Top Coat
- Pack sizes
- 1- and 5-gallon kit sizes; 24 months
- Coverage
- 13.8 m²/L at 50 µm; 9.2 m²/L at 75 µm, before loss
See it applied
Polyurethane top coat on steel
How KREVO Shield PU-Top goes on site, step by step.
- 1 Spray the top coat
- 2 Protected steel
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Shield PU-Top is a two-component aliphatic acrylic polyurethane finish coat for industrial protective coating systems. It is designed to provide a smooth, high-gloss decorative and protective finish with excellent resistance to weathering, abrasion and industrial exposure.
Advantages
- High-gloss, durable finish with excellent outdoor weathering properties.
- High-solids formulation with comparatively low VOC content.
- Good flow, colour and gloss retention with impact and abrasion resistance.
- Suitable for spray and roller application over compatible primed surfaces.
- Flexible coating-system design with compatible epoxy intermediate layers.
Typical uses
- Industrial structural steel
- Plant equipment and exposed pipework
- Marine and coastal atmospheric steelwork
- Tanks and supporting structures (external)
- Industrial maintenance topcoats
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Specification
- Generic type
- Two-component aliphatic acrylic polyurethane topcoat
- Colours
- Industrial colour range; colour availability to be confirmed
- Finish
- High gloss
- Recommended dry film thickness
- 50–75 µm (2–3 mils) per coat
- Volume solids
- Approximately 70% ± 2%
- Theoretical coverage
- 13.8 m²/L at 50 µm; 9.2 m²/L at 75 µm, before loss
- Mixing ratio (A:B)
- 4:1 by volume; mix complete matched kits
- VOC as supplied
- Approximately 264 g/L (shade dependent)
- Pot life at 24 °C
- Approximately 4 hours; decreases with temperature
- Dry temperature resistance
- 93 °C continuous; 121 °C intermittent
- Airless / conventional spray
- Apply with suitable equipment; qualified thinner up to 20%
- Brush / roller
- Touch-up / selected areas; approved compatible reducer
- Application over primed steel
- Use a compatible cured epoxy / qualified primer system
- Weathering / abrasion
- Weather-resistant glossy finish; system testing is application-specific
- Topcoat service
- For exposed atmospheric environments; protect from moisture during cure
Used together with
Steel protection system
KREVO Shield PU-Top is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.
-
1Zinc-rich primer
-
2Epoxy intermediate coat
-
3Polyurethane top coat
KREVO Shield PU-Top
This product
FAQ
KREVO Shield PU-Top: questions
What is KREVO Shield PU-Top?
KREVO Shield PU-Top is a two-component aliphatic acrylic polyurethane finish coat for industrial protective coating systems. It is designed to provide a smooth, high-gloss decorative and protective finish with excellent resistance to weathering, abrasion and industrial exposure.
What is KREVO Shield PU-Top used for?
KREVO Shield PU-Top is used for: industrial structural steel; plant equipment and exposed pipework; marine and coastal atmospheric steelwork; tanks and supporting structures (external); industrial maintenance topcoats.
How is KREVO Shield PU-Top applied?
In outline: 1. Spray the top coat 2. Protected steel. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Shield PU-Top available in?
KREVO Shield PU-Top is supplied in 1- and 5-gallon kit sizes; 24 months.
What is the coverage of KREVO Shield PU-Top?
Coverage / consumption: 13.8 m²/L at 50 µm; 9.2 m²/L at 75 µm, before loss. Actual consumption depends on the substrate and application; see the technical data sheet.
Is there a technical data sheet for KREVO Shield PU-Top?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Coatings & Linings
Zinc Rich Primer
Coatings & Linings
KREVO Shield Zinc Primer
Inorganic zinc-rich primer · Galvanic corrosion protection · Industrial & marine steel
View product
Zinc Phosphate Primer
Coatings & Linings
KREVO Shield EP-ZP
High-build epoxy zinc-phosphate primer · Phenalkamine cured · Industrial steel protection
View product
Epoxy Mid Coat
Coatings & Linings
KREVO Shield EP-Mid
High-solids epoxy intermediate coating · Modified polyamido-amine cured · Steel protection
View product