KREVO Carbon Strip
High-Strength pultruded CFRP strengthening strip · HS, IM and HM grades |
- Type
- CFRP Strip
- Pack sizes
- 100 m rolls; dry and shaded storage; no specified shelf-life limit under these conditions
Overview
KREVO Carbon Strip is a black, pultruded carbon-fiber-reinforced polymer (CFRP) strip for externally bonded structural strengthening. When bonded using a compatible high-performance epoxy adhesive, the strip is intended to resist tensile, shear and impact demands where supported by structural design. The range includes high-strength (HS), intermediate-modulus (IM) and high-modulus (HM) grades.
Advantages
- Lightweight system with a high strength-to-weight ratio and fast installation.
- Available in high-strength, intermediate-modulus and high-modulus grades.
- Multiple standard strip widths and nominal thicknesses suit varied designs.
- Suitable for straight surfaces and selected curved details subject to design approval.
- Can be combined with compatible CFRP reinforcing rods where specified.
Typical uses
- Beams and slabs
- Walls and columns
- Culverts
- Curved and complex structural details
- External tensile and flexural strengthening of reinforced concrete members
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Specification
- Material type
- Pultruded carbon-fiber-reinforced polymer (CFRP) strip / plate
- Colour
- Black
- Available grades
- HS - High Strength | IM - Intermediate Modulus | HM - High Modulus
- HS strip thicknesses
- HS 1200: 1.2 mm | HS 1400: 1.4 mm
- IM strip thickness
- IM 1200: 1.2 mm
- HM strip thicknesses Standard widths
- HM 1200: 1.2 mm | HM 1400: 1.4 mm HS 1200: 20, 50, 60, 80, 100, 120, 150 mm; HS 1400: 50, 60, 80, 90, 120 mm; IM 1200: 50, 60, 80, 90, 100, 120 mm; HM 1200/1400: 50, 80, 120 mm
- Carbon fiber content
- HS >68% | IM >68% | HM >68%
- Nominal thickness
- HS 1.2/1.4 mm | IM 1.2 mm | HM 1.2/1.4 mm
- Modulus of elasticity
- HS >165 GPa | IM >210 GPa | HM >400 GPa
- Tensile strength
- HS >3,000 MPa | IM >2,400 MPa | HM >1,500 MPa
FAQ
KREVO Carbon Strip: questions
What is KREVO Carbon Strip?
KREVO Carbon Strip is a black, pultruded carbon-fiber-reinforced polymer (CFRP) strip for externally bonded structural strengthening. When bonded using a compatible high-performance epoxy adhesive, the strip is intended to resist tensile, shear and impact demands where supported by structural design. The range includes high-strength (HS), intermediate-modulus (IM) and high-modulus (HM) grades.
What is KREVO Carbon Strip used for?
KREVO Carbon Strip is used for: beams and slabs; walls and columns; culverts; curved and complex structural details; external tensile and flexural strengthening of reinforced concrete members.
What pack sizes is KREVO Carbon Strip available in?
KREVO Carbon Strip is supplied in 100 m rolls; dry and shaded storage; no specified shelf-life limit under these conditions.
Is there a technical data sheet for KREVO Carbon Strip?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in CFRP Systems
CFRP Fibre Wrap
CFRP Systems
KREVO Carbon Fabric
High-StrengthUunidirectional Carbon Fibre Fabric · Structural strengthening
View product
Wrap Adhesive
CFRP Systems
KREVO Carbon Lamination EP
Solvent-free, Epoxy lamination resin · Carbon-fibre fabric impregnation
View product
Strip Adhesive
CFRP Systems
KREVO Carbon Bond EP
High-strength thixotropic epoxy adhesive · CFRP strip and plate bonding · Standard & Slow grades
View product