KREVO Floor PU-SL
Self-leveling Urethane Hybrid Flooring · Flow-applied floor topping
- Type
- PU SL
- Pack sizes
- 15 L
- Coverage
- 1 L/m² @ 1mm
Overview
KREVO Floor PU-SL is specified as a Heavy-duty, flow-applied, self-smoothing urethane-hybrid floor topping for industrial concrete substrates. The system is intended to provide a continuous surface with resistance to wear, chemical exposure and physical traffic. A urethane-prepolymer-based composition is specified for reduced shrinkage, extended working time and tolerance of humid service environments.
Advantages
- Seamless, self-smoothing finish with high durability and abrasion resistance.
- Designed for resistance to impact, routine cleaning chemicals and moisture.
- Specified for enhanced slip resistance in both wet and dry conditions.
- Formaldehyde-free formulation and low-VOC performance are qualification requirements.
- Suitable for industrial areas and warm / tropical environments where approved.
Typical uses
- Food processing and wet-cleaned areas
- Breweries and dairy facilities
- Chemical-processing plants
- Engineering and production facilities
- Aircraft hangars and industrial service floors
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Floor PU-SL
120 minutes
Usable life of mixed unit at 20 °C
24 hours / 48 hours
Light pedestrian traffic / heavy-duty traffic
5 days
Full cure
4 mm
Specified thickness
−5 °C to +75 °C
Service temperature
< 25 g/L
Volatile organic content (VOC)
1 L/m² @ 1mm
Theoretical coverage at 2 mm
> 65 MPa
Compressive strength | ASTM C109
Product information
- Flexural strength | ASTM C580
- > 32 MPa
- Tensile strength | ASTM D638
- > 15 MPa
- Abrasion loss | ASTM D4060, CS17, 1,000 g / 1,000 revolutions
- < 0.1 g
- Slip resistance | BS 7976, wet
- > 0.7
- Slip resistance | BS 7976, dry
- > 1.29
FAQ
KREVO Floor PU-SL: questions
What is KREVO Floor PU-SL?
KREVO Floor PU-SL is specified as a Heavy-duty, flow-applied, self-smoothing urethane-hybrid floor topping for industrial concrete substrates. The system is intended to provide a continuous surface with resistance to wear, chemical exposure and physical traffic. A urethane-prepolymer-based composition is specified for reduced shrinkage, extended working time and tolerance of humid service…
What is KREVO Floor PU-SL used for?
KREVO Floor PU-SL is used for: food processing and wet-cleaned areas; breweries and dairy facilities; chemical-processing plants; engineering and production facilities; aircraft hangars and industrial service floors.
What pack sizes is KREVO Floor PU-SL available in?
KREVO Floor PU-SL is supplied in 15 L.
What is the coverage of KREVO Floor PU-SL?
Coverage / consumption: 1 L/m² @ 1mm. Actual consumption depends on the substrate and application; see the technical data sheet.
Is there a technical data sheet for KREVO Floor PU-SL?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Floor Solutions
PU Screed
Floor Solutions
KREVO Floor PU-Screed
Heavy-duty polyurethane-cement floor screed · Hygienic, slip-resistant finish · 6-12 mm
View product
Epoxy SL
Floor Solutions
KREVO Floor EP-SL
Abrasion- and chemical-resistant self-leveling epoxy flooring · Three-component system · 1–4 mm
View product
Epoxy Coating
Floor Solutions
KREVO Floor EP-Coat
Solvent-free high-build epoxy floor coating · Chemical and abrasion resistant · Smooth or anti-slip finish
View product