Skip to content
Krevo
KREVO Guard Penetrating Sealer
Concrete Repair

KREVO Guard Penetrating Sealer

Hydrophobic penetrating fluorosilane sealer · Water & chloride protection · Stain repellency

Type
Penetrating Sealer
Pack sizes
19 L (5 US gal) pail and 200 L (55.5 US gal) drum
Coverage
0.20 litre/m² per coat; generally one coat on dense concrete
Shelf life
24 months, dry and shaded at +30 °C or below
Technical data sheet

Overview

KREVO Guard Penetrating Sealer is a clear, solvent-free fluorosilane-based hydrophobic treatment for concrete and masonry. The penetrating treatment is designed to reduce the ingress of water and chloride ions, limit staining by oils and fuels, and maintain the original substrate appearance. It is intended to provide water repellency without forming a conventional film on the surface.

Advantages

  • Reduces capillary water absorption and chloride ion ingress into sound concrete.
  • Helps resist staining from motor oil, gasoline, kerosene and diesel.
  • Non-film-forming treatment designed to retain water-vapour transmission and natural appearance.
  • Clear, low-viscosity penetrating liquid; single-coat application on suitable concrete.
  • Solvent-free design with low fire risk and a zero-VOC formulation objective.

Typical uses

  • Bridges and highway structures
  • Marine and coastal concrete
  • Parking decks
  • Commercial buildings
  • Industrial facilities
  • Exposed masonry and reinforced-concrete surfaces requiring water and stain repellency

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Guard Penetrating Sealer

> 90%

Reduction in chloride ion penetration

> 95%

Reduction in water absorption

< 0.1%

Siloxane content

Approximately 1.0

Specific gravity

< 150 cP

Viscosity

> 100 °C

Boiling point

< 10 ppm

Chloride content

Product information

Material type
Solvent-free, clear penetrating fluorosilane water repellent
Appearance / colour
Clear liquid; minimal visual change on properly treated concrete
Function
Hydrophobic treatment for chloride, water and oil-stain repellency
Compatible substrates
Concrete and masonry (confirm by trial area)
Application method
Flow coat, roller or low-pressure spray
Minimum theoretical consumption
0.20 litre/m² per coat; generally one coat on dense concrete
Shelf life / storage
24 months, dry and shaded at +30 °C or below

FAQ

KREVO Guard Penetrating Sealer: questions

What is KREVO Guard Penetrating Sealer?

KREVO Guard Penetrating Sealer is a clear, solvent-free fluorosilane-based hydrophobic treatment for concrete and masonry. The penetrating treatment is designed to reduce the ingress of water and chloride ions, limit staining by oils and fuels, and maintain the original substrate appearance. It is intended to provide water repellency without forming a conventional film on the surface.

What is KREVO Guard Penetrating Sealer used for?

KREVO Guard Penetrating Sealer is used for: bridges and highway structures; marine and coastal concrete; parking decks; commercial buildings; industrial facilities; exposed masonry and reinforced-concrete surfaces requiring water and stain repellency.

What pack sizes is KREVO Guard Penetrating Sealer available in?

KREVO Guard Penetrating Sealer is supplied in 19 L (5 US gal) pail and 200 L (55.5 US gal) drum.

What is the coverage of KREVO Guard Penetrating Sealer?

Coverage / consumption: 0.20 litre/m² per coat; generally one coat on dense concrete. Actual consumption depends on the substrate and application; see the technical data sheet.

What is the shelf life of KREVO Guard Penetrating Sealer?

Shelf life / storage: 24 months, dry and shaded at +30 °C or below.

Is there a technical data sheet for KREVO Guard Penetrating Sealer?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Guard Penetrating Sealer