KREVO Proof Cem-Flex
Two-component polymer-modified cementitious waterproofing slurry · Brush or trowel applied
- Type
- Cementitious Coating
- Pack sizes
- 30 kg set: 10 kg Part A liquid + 30 kg Part B powder
- Shelf life
- At least 6 months unopened when stored dry, shaded at +5 °C to +35 °C
Overview
KREVO Proof Cem-Flex is a two-component, polymer-modified cementitious waterproofing slurry supplied as a pre-measured liquid-polymer and cementitious-powder set. Mixed to a homogeneous grey slurry, the material is designed to waterproof and damp-proof sound concrete, mortar and masonry surfaces in below-grade and exposed construction applications.
Advantages
- Pre-proportioned components for convenient mixing and application.
- Good adhesion to prepared substrates with resistance to water penetration.
- Suitable for brush-applied slurry or thicker trowel application.
- Slightly flexible coating with resistance to abrasion and erosion.
- Non-flammable, non-corrosive cementitious waterproofing system.
Typical uses
- Basements and retaining walls
- Water tanks and swimming pools
- Flat roofs, balconies and terraces
- Bridges and sea walls
- Tunnels
- Waterproofing of concrete, mortar, brickwork and suitably prepared steel
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Proof Cem-Flex
Approximately 90
Shore A hardness | ASTM D2240
40 MPa at 28 days
Compressive strength | ASTM C109
9 MPa at 28 days
Flexural tensile strength | ASTM C348
1 MPa
Tensile adhesion | ASTM D4541
66% after 14 days
Elongation
Up to 1.2 mm
Crack-bridging ability
Product information
- Material type
- Two-component, polymer-modified cementitious waterproofing slurry
- Chemical base
- Cement, selected graded aggregates and polymer dispersion
- Component appearance
- Part A: white liquid; Part B: grey powder; mixed: grey slurry
- Mixing ratio (A:B) by weight
- Brush 1:4; trowel 1:4.5 (use approx. 90% of the Part A liquid)
- Fresh mortar density
- Approximately 2.1-2.2 kg/L
- Storage / shelf life
- At least 6 months unopened when stored dry, shaded at +5 °C to +35 °C
- Theoretical yield
- Approximately 20 L of mixed mortar per 40 kg set
- Water-tightness / negative pressure
- No penetration reported; 5 bar for 72 h
FAQ
KREVO Proof Cem-Flex: questions
What is KREVO Proof Cem-Flex?
KREVO Proof Cem-Flex is a two-component, polymer-modified cementitious waterproofing slurry supplied as a pre-measured liquid-polymer and cementitious-powder set. Mixed to a homogeneous grey slurry, the material is designed to waterproof and damp-proof sound concrete, mortar and masonry surfaces in below-grade and exposed construction applications.
What is KREVO Proof Cem-Flex used for?
KREVO Proof Cem-Flex is used for: basements and retaining walls; water tanks and swimming pools; flat roofs, balconies and terraces; bridges and sea walls; tunnels; waterproofing of concrete, mortar, brickwork and suitably prepared steel.
What pack sizes is KREVO Proof Cem-Flex available in?
KREVO Proof Cem-Flex is supplied in 30 kg set: 10 kg Part A liquid + 30 kg Part B powder.
What is the shelf life of KREVO Proof Cem-Flex?
Shelf life / storage: At least 6 months unopened when stored dry, shaded at +5 °C to +35 °C.
Is there a technical data sheet for KREVO Proof Cem-Flex?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Waterproofing
Polyurethane Acrylic
Waterproofing
KREVO Proof PU-Acryl
One-component polyurethane-acrylic liquid waterproofing membrane · UV-resistant roof coating
View product
Acrylic Coating
Waterproofing
KREVO Proof Acryl
Flexible single-component acrylic waterproofing membrane · UV- and weather-resistant roof coating
View product
Bitumen Membrane
Waterproofing
KREVO Proof Torch
Polymer-modified bitumen torch-on waterproofing membrane · APP & SBS · 3-4 mm
View product