Skip to content
Krevo
KREVO Proof Torch
Waterproofing

KREVO Proof Torch

Polymer-modified bitumen torch-on waterproofing membrane · APP & SBS · 3-4 mm

Type
Bitumen Membrane
Pack sizes
1 m wide × 10 m long
Shelf life
Store dry and shaded on wooden pallets; protect from sunlight
Technical data sheet

Overview

KREVO Proof Torch is a family of heavy-duty, torch-applied waterproofing sheet membranes. The polyester-reinforced, polymer-modified bitumen construction is designed to form a bonded water- and vapour-resistant barrier on suitably prepared roofs, concrete slabs and below-grade structures. APP- and SBS-modified grades are available in nominal 3 mm and 4 mm thicknesses.

Advantages

  • Heavy-duty waterproofing membrane with reliable adhesion to sound horizontal and vertical substrates.
  • Designed for resistance to tearing, puncture and water-vapour transmission.
  • Resistant to chlorides, sulphates, alkalis and acids under suitable service conditions.
  • Available as 3 mm or 4 mm APP and SBS modified-bitumen grades.
  • Choice of standard, sand and slate finishes; anti-root SBS option available on request.

Typical uses

  • Below-grade waterproofing
  • Above-grade waterproofing
  • Concrete slabs
  • Roof decks and terraces
  • Foundations and retaining structures
  • Buried structural elements requiring protection from water ingress

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Proof Torch

3A: 3 mm | 4A: 4 mm

APP grade / nominal thickness

3S: 3 mm | 4S: 4 mm

SBS grade / nominal thickness

800 N / 5 cm

Tensile strength, longitudinal

600 N / 5 cm

Tensile strength, transverse

40-50%

Elongation

Less than 0.15%

Water absorption

L4 / T2

Static / dynamic puncture resistance

125 °C

Heat resistance - SBS grades (3S / 4S)

Product information

Material type
Polyester-reinforced, polymer-modified bitumen sheet membrane
Surface finishes
Standard, sand and slate
Special grade
Anti-root SBS membrane available on request
Storage conditions
Store dry and shaded on wooden pallets; protect from sunlight
Primer compatibility
Suitable compatible solvent-based or water-based bituminous primer
Heat resistance - APP grades (3A / 4A)
100 °C
Hydrostatic-head resistance
Up to 70 m
Volatile organic content
0 g/L

FAQ

KREVO Proof Torch: questions

What is KREVO Proof Torch?

KREVO Proof Torch is a family of heavy-duty, torch-applied waterproofing sheet membranes. The polyester-reinforced, polymer-modified bitumen construction is designed to form a bonded water- and vapour-resistant barrier on suitably prepared roofs, concrete slabs and below-grade structures. APP- and SBS-modified grades are available in nominal 3 mm and 4 mm thicknesses.

What is KREVO Proof Torch used for?

KREVO Proof Torch is used for: below-grade waterproofing; above-grade waterproofing; concrete slabs; roof decks and terraces; foundations and retaining structures; buried structural elements requiring protection from water ingress.

What pack sizes is KREVO Proof Torch available in?

KREVO Proof Torch is supplied in 1 m wide × 10 m long.

What is the shelf life of KREVO Proof Torch?

Shelf life / storage: Store dry and shaded on wooden pallets; protect from sunlight.

Is there a technical data sheet for KREVO Proof Torch?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Proof Torch