Skip to content
Krevo
KREVO Seal Butyl Tape
Waterproofing

KREVO Seal Butyl Tape

Single-sided aluminium/polyester laminated butyl sealing tape · Waterproof, UV-resistant and flexible

Type
Butyl Tape
Pack sizes
10 m
Shelf life
Dry, shaded location at temperatures below +30 °C
Technical data sheet

See it applied

Sealing metal roof joints

How KREVO Seal Butyl Tape goes on site, step by step.

  1. 1 Clean the sheet joints
  2. 2 Seal the joints
  3. 3 Tape the joints

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Seal Butyl Tape is a single-sided self-adhesive waterproof sealing tape comprising a butyl adhesive layer supported by an aluminium/polyester laminate film. It provides a flexible seal for building envelope joints, cladding, roof flashings and air duct details on sound, suitably prepared substrates.

Advantages

  • Self-adhesive, straightforward to cut and apply with no separate bonding adhesive.
  • Waterproof and resistant to UV exposure, with a flexible, compressible seal.
  • Rot-proof construction suitable for a broad range of building-envelope details.
  • Bonds to many metallic, glazed, polymeric and mineral surfaces after suitable preparation.
  • Offered in a selection of widths for joints, flashings and wide-area sealing.

Typical uses

  • Cladding and curtain-wall air seals
  • Waterproofing butt joints
  • Roof-tile and gutter flashings
  • Air-conditioning duct sealing
  • General construction joint detailing where compatible and approved

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Seal Butyl Tape

0.7 mm

Nominal thickness

< 0.1%

Water absorption

< 0.5 g/m² / 24 h

Water-vapour transmission

> 5 N/mm

Tape strength

> 10 N/mm

Tear strength

> 200 N

Puncture resistance

-40 °C to +80 °C

Service temperature

Product information

Product type
Single-sided, self-adhesive butyl sealing tape
Laminate / backing
Aluminium/polyester laminate film
Adhesive
Butyl pressure-sensitive sealing layer
Available widths
50 mm, 75 mm, 100 mm and 1,000 mm
Storage
Dry, shaded location at temperatures below +30 °C
Shelf life
24 months under the stated storage conditions
Water penetration at 2 bar
Nil
UV exposure | QUV 300 hours
No effect
Sag resistance
Nil between +5 °C and +80 °C

FAQ

KREVO Seal Butyl Tape: questions

What is KREVO Seal Butyl Tape?

KREVO Seal Butyl Tape is a single-sided self-adhesive waterproof sealing tape comprising a butyl adhesive layer supported by an aluminium/polyester laminate film. It provides a flexible seal for building envelope joints, cladding, roof flashings and air duct details on sound, suitably prepared substrates.

What is KREVO Seal Butyl Tape used for?

KREVO Seal Butyl Tape is used for: cladding and curtain-wall air seals; waterproofing butt joints; roof-tile and gutter flashings; air-conditioning duct sealing; general construction joint detailing where compatible and approved.

How is KREVO Seal Butyl Tape applied?

In outline: 1. Clean the sheet joints 2. Seal the joints 3. Tape the joints. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Seal Butyl Tape available in?

KREVO Seal Butyl Tape is supplied in 10 m.

What is the shelf life of KREVO Seal Butyl Tape?

Shelf life / storage: Dry, shaded location at temperatures below +30 °C.

Is there a technical data sheet for KREVO Seal Butyl Tape?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Seal Butyl Tape