Skip to content
Krevo
KREVO Grout HS
Concrete Repair

KREVO Grout HS

High-strength, shrinkage-compensated precision grout · Controlled expansion · 30-150 mm

Type
High Strength Non Shrink Grout
Pack sizes
40 kg bags
Shelf life
12 months; dry and shaded, between +5 °C and +30 °C
Technical data sheet

Overview

KREVO Grout HS is a high-strength, shrinkage-compensated cementitious grout designed for precision placement beneath structural and mechanical components. Dual shrinkage compensation is specified for both plastic and hardened states to support dimensional stability and non-shrink performance. The mixed grout is placed as a free-flowing material in prepared cavities and below base plates.

Advantages

  • High early and ultimate compressive strength for critical grouting work.
  • Controlled expansion and dual shrinkage-compensation characteristics.
  • Designed for good dimensional stability and secure contact with the substrate.
  • Chloride-free formulation for steel-adjacent grouting applications.
  • Suitable for flowable, precision placement with controlled mixing and formwork.

Typical uses

  • Bridge bearings and bridge beds
  • Industrial and machinery base plates
  • Anchor bolts and threaded rods
  • Crane rails
  • Structural columns and precast elements
  • Hole footings
  • Precision machine grouting

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Grout HS

30-150 mm

Standard application depth

45 MPa

Compressive strength | 24 hours

75 MPa

Compressive strength | 7 days

92 MPa

Compressive strength | 28 days

102 MPa

Compressive strength | 90 days

Approximately 1.5 m

Flow at 30 mm gap / 100 mm head

Approximately 2 m

Flow at 30 mm gap / 250 mm head

More than 3 m

Flow at 50 mm gap / 250 mm head

Product information

Product type
High-strength, shrinkage-compensated cementitious precision grout
Shrinkage compensation
Dual compensation in plastic and hardened states
Primary function
Flowable precision grouting beneath and around structural components
Extended application depth
Up to 350 mm with specified 5-10 mm aggregate extension
Yield
Approximately 20 L mixed grout per 40 kg bag; varies with water
Shelf life / storage
12 months; dry and shaded, between +5 °C and +30 °C
Flow at 50 mm gap / 100 mm head
Approximately 2 m
Specification framework
ASTM C1107

FAQ

KREVO Grout HS: questions

What is KREVO Grout HS?

KREVO Grout HS is a high-strength, shrinkage-compensated cementitious grout designed for precision placement beneath structural and mechanical components. Dual shrinkage compensation is specified for both plastic and hardened states to support dimensional stability and non-shrink performance. The mixed grout is placed as a free-flowing material in prepared cavities and below base plates.

What is KREVO Grout HS used for?

KREVO Grout HS is used for: bridge bearings and bridge beds; industrial and machinery base plates; anchor bolts and threaded rods; crane rails; structural columns and precast elements; hole footings; precision machine grouting.

What pack sizes is KREVO Grout HS available in?

KREVO Grout HS is supplied in 40 kg bags.

What is the shelf life of KREVO Grout HS?

Shelf life / storage: 12 months; dry and shaded, between +5 °C and +30 °C.

Is there a technical data sheet for KREVO Grout HS?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Grout HS