Skip to content
Krevo
KREVO Floor EP-Screed
Floor Solutions

KREVO Floor EP-Screed

High-strength, load-bearing trowelable epoxy screed · Three-component system · 4-20 mm

Type
Epoxy Screed
Pack sizes
12 L pack (component arrangement to be confirmed)
Shelf life
18 months in sealed original containers stored dry below +35 °C
Technical data sheet

Overview

KREVO Floor EP-Screed is specified as a high-strength, trowel-applied epoxy mortar made from resin, hardener and graded mineral aggregate. It is intended as a tough load-bearing and levelling base layer for subsequent resin floor coatings or toppings, with resistance to mechanical impact and industrial chemical exposure.

Advantages

  • Dense, hard-wearing, high-strength industrial epoxy screed.
  • Suitable for levelling and repairing uneven concrete before finishing coats.
  • Trowelable mortar construction permits local thickness build-up.
  • Designed for durable service where impact, wear and chemical exposure are expected.
  • Low-VOC and formaldehyde-free composition are formulation targets requiring confirmation.

Typical uses

  • Industrial and processing floors
  • Load-bearing floor resurfacing
  • Depressions and local repairs
  • Levelling under epoxy flooring systems
  • Substrate build-up prior to chemical-resistant protective coatings

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Floor EP-Screed

4-20 mm

Designed installed thickness

0 to +65 °C

Service temperature

< 10 g/L

VOC specification

> 65 N/mm² at 7 days

Compressive strength | BS 6319

> 15 N/mm² at 7 days

Flexural strength | BS 6319

> 10 N/mm² at 7 days

Tensile strength | BS 6319

Product information

Material type
Three-component epoxy resin / hardener / graded aggregate mortar
Application method
Trowel or screed box; subsequent compatible resin floor finish
Shelf life
18 months in sealed original containers stored dry below +35 °C
Theoretical yield at 5 mm
2.8 m² per pack, subject to pack-yield and site verification
Water absorption | BS 1881
Nil

FAQ

KREVO Floor EP-Screed: questions

What is KREVO Floor EP-Screed?

KREVO Floor EP-Screed is specified as a high-strength, trowel-applied epoxy mortar made from resin, hardener and graded mineral aggregate. It is intended as a tough load-bearing and levelling base layer for subsequent resin floor coatings or toppings, with resistance to mechanical impact and industrial chemical exposure.

What is KREVO Floor EP-Screed used for?

KREVO Floor EP-Screed is used for: industrial and processing floors; load-bearing floor resurfacing; depressions and local repairs; levelling under epoxy flooring systems; substrate build-up prior to chemical-resistant protective coatings.

What pack sizes is KREVO Floor EP-Screed available in?

KREVO Floor EP-Screed is supplied in 12 L pack (component arrangement to be confirmed).

What is the shelf life of KREVO Floor EP-Screed?

Shelf life / storage: 18 months in sealed original containers stored dry below +35 °C.

Is there a technical data sheet for KREVO Floor EP-Screed?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Floor EP-Screed