KREVO Inject EP
Low-viscosity two-component epoxy injection resin · Structural crack sealing · Solvent-free
- Type
- Structural Epoxy Injection
- Pack sizes
- 5 kg two-component set; 6 × 1 kg pack option
- Shelf life
- 24 months in closed packs; condition at +15 °C to +30 °C
Overview
KREVO Inject EP is a two-component, solvent-free, low-viscosity epoxy injection resin for filling and bonding static cracks and internal voids in sound concrete and masonry. It can be introduced by pressure injection or gravity filling to restore continuity across cracks and form a barrier to water and harmful ingress. It is suited to dry and saturated-surface-dry substrates without flowing or standing water.
Advantages
- Low-viscosity resin penetrates narrow cracks and internal voids.
- Strong adhesion to sound concrete, mortar, stone, steel and wood.
- Solvent-free formula with high hardened mechanical resistance.
- Suitable for dry and damp crack faces without free water.
- Hardens with minimal shrinkage to form a rigid structural bond.
Typical uses
- Structural crack injection in bridges and buildings
- Columns, beams and foundations
- Concrete walls, slabs and pavements
- Water-retaining structures
- Static cracks in masonry and stone
- Gravity-filling of horizontal cracks and pressure-injection of vertical cracks
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Inject EP
Approximately 1.1 kg/L
Mixed density
1,200 mPa·s
Viscosity at +10 °C
430 mPa·s
Viscosity at +20 °C
220 mPa·s
Viscosity at +30 °C
Product information
- Generic type
- Two-component, solvent-free, low-viscosity epoxy injection resin
- Chemical composition
- Solvent-free modified epoxy resin with matched hardener
- Mixing ratio A : B
- 2 : 1 by weight; 1.8 : 1 by volume
- Appearance / colour
- Clear yellow liquid after mixing Parts A + B
- Substrate condition
- Dry or saturated-surface-dry, with no free water
- Shelf life / storage
- 24 months in closed packs; condition at +15 °C to +30 °C
- Compressive strength | ASTM D695
- 52 MPa at 7 days (+23 °C)
- Tensile strength | ISO 527
- 37 MPa at 7 days (+23 °C)
- Flexural tensile strength | DIN 53452
- 61 MPa at 7 days (+23 °C)
- Flexural modulus | DIN 53452
- 1,800 MPa at 7 days (+23 °C)
- Tensile adhesion to concrete
- > 4 MPa; concrete failure at 7 days
- Thermal expansion | EN ISO 1770
- 8.9 × 10⁻⁵ per °C (−20 °C to +40 °C)
FAQ
KREVO Inject EP: questions
What is KREVO Inject EP?
KREVO Inject EP is a two-component, solvent-free, low-viscosity epoxy injection resin for filling and bonding static cracks and internal voids in sound concrete and masonry. It can be introduced by pressure injection or gravity filling to restore continuity across cracks and form a barrier to water and harmful ingress. It is suited to dry and saturated-surface-dry substrates without flowing or…
What is KREVO Inject EP used for?
KREVO Inject EP is used for: structural crack injection in bridges and buildings; columns, beams and foundations; concrete walls, slabs and pavements; water-retaining structures; static cracks in masonry and stone; gravity-filling of horizontal cracks and pressure-injection of vertical cracks.
What pack sizes is KREVO Inject EP available in?
KREVO Inject EP is supplied in 5 kg two-component set; 6 × 1 kg pack option.
What is the shelf life of KREVO Inject EP?
Shelf life / storage: 24 months in closed packs; condition at +15 °C to +30 °C.
Is there a technical data sheet for KREVO Inject EP?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Injection System
Water Plug
Injection System
KREVO Plug Rapid
Ultra-rapid-setting water-stopping mortar · Single-component · Active leak plugging
View product
PU Injection Permanent
Injection System
KREVO Inject PU-Flex
Two-component flexible polyurethane injection resin · Elastic sealing of concrete cracks and leaking joints
View product
PU Injection Temporary
Injection System
KREVO Inject PU-Foam
Water-reactive two-component polyurethane injection foam · Rapid stopping of active leaks
View product