Skip to content
Krevo
KREVO Floor EP-SL
Floor Solutions

KREVO Floor EP-SL

Abrasion- and chemical-resistant self-leveling epoxy flooring · Three-component system · 1–4 mm

Type
Epoxy SL
Pack sizes
17 L pack configuration
Technical data sheet

See it applied

Installing an epoxy floor

How KREVO Floor EP-SL goes on site, step by step.

  1. 1 Pour and spread
  2. 2 Spiked-roller finish
  3. 3 Completed floor

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Floor EP-SL is a three-component, self-smoothing epoxy floor topping designed to form a dense, durable and easy-to-clean industrial wearing surface. The system may be configured with a pigmented resin base or a neutral base with a separate colour pack. Four application grades provide a range of thickness options for commercial and industrial floor protection.

Advantages

  • Dense, seamless, self-smoothing epoxy floor surface with good cleanability.
  • High impact and abrasion resistance; suitable for regular industrial floor traffic.
  • Designed to resist a wide range of chemical splashes and routine cleaning chemicals.
  • Suitable for hygiene-conscious, easily maintained work areas.
  • Low-odour, low-VOC design criterion; formaldehyde-free composition criterion.
  • Single continuous wearing layer when installed over an approved primer.

Typical uses

  • Food and beverage production
  • Pharmaceutical facilities
  • Kitchens and laundries
  • Hospitals
  • Laboratories and cleanrooms
  • Chemical handling and processing areas

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Floor EP-SL

1.0–1.5 mm

KREVO Floor EP-SL 1

2.5 mm

KREVO Floor EP-SL 2

3 mm

KREVO Floor EP-SL 3

4 mm

KREVO Floor EP-SL 4

>5 J >5 J >5 J

Impact resistance | ASTM D2794

<50 mg <50 mg <50 mg

Abrasion resistance | ASTM D4060

Product information

Compressive strength | ASTM D695
>70 MPa >70 MPa >70 MPa
Compressive modulus | ASTM D695
>5,000 MPa >5,000 MPa >5,000 MPa
Flexural strength | ASTM EN 196
>35 MPa >35 MPa >40 MPa
Tensile strength | ASTM D638
>15 MPa >15 MPa >20 MPa
Static friction | ASTM F609
>0.9 dry / >0.6 wet >0.9 dry / >0.6 wet >0.9 dry / >0.6 wet

Used together with

Epoxy floor system

KREVO Floor EP-SL is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Primer

  2. 2Floor topping or coating

    KREVO Floor EP-SL This product KREVO Floor EP-Coat Epoxy Coating

FAQ

KREVO Floor EP-SL: questions

What is KREVO Floor EP-SL?

KREVO Floor EP-SL is a three-component, self-smoothing epoxy floor topping designed to form a dense, durable and easy-to-clean industrial wearing surface. The system may be configured with a pigmented resin base or a neutral base with a separate colour pack. Four application grades provide a range of thickness options for commercial and industrial floor protection.

What is KREVO Floor EP-SL used for?

KREVO Floor EP-SL is used for: food and beverage production; pharmaceutical facilities; kitchens and laundries; hospitals; laboratories and cleanrooms; chemical handling and processing areas.

How is KREVO Floor EP-SL applied?

In outline: 1. Pour and spread 2. Spiked-roller finish 3. Completed floor. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Floor EP-SL available in?

KREVO Floor EP-SL is supplied in 17 L pack configuration.

Is there a technical data sheet for KREVO Floor EP-SL?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Floor EP-SL