Skip to content
Krevo
KREVO Floor EP-AS
Floor Solutions

KREVO Floor EP-AS

Conductive and dissipative epoxy flooring system · Self-smoothing · 2-4 mm

Type
Antistatic Floor
Pack sizes
Epoxy primer 1, 5 and 15 L; functional base coat 4.5 and 18 L; epoxy top coat 17 L
Shelf life
18 months in sealed packaging; ≤ +35 °C, dry, shaded and frost-free
Technical data sheet

Overview

KREVO Floor EP-AS is specified as a three-layer electrostatic-control epoxy flooring system consisting of an epoxy primer, a water-dispersed conductive base coat and a self-smoothing solvent-free epoxy wearing coat. Two grades are specified: conductive (CG) and static-dissipative (DG). The complete floor system is designed for controlled electrical resistance together with a smooth, easy-clean industrial wearing surface.

Advantages

  • Controlled conductive or dissipative resistance for electrostatic-control installations.
  • Dense, easily cleaned, gloss self-smoothing wearing finish.
  • High resistance to mechanical impact, abrasion and common process chemicals.
  • Low-VOC system components and rapid application using trained coating personnel.

Typical uses

  • Electronic manufacturing and assembly plants
  • Hospitals
  • Clean rooms
  • Chemical handling and processing areas
  • Areas requiring electrical- charge control

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Floor EP-AS

5 × 10⁴ to 1 × 10⁶ Ω

CG | Conductive

5 × 10⁶ to 1 × 10⁹ Ω

DG | Dissipative

>60 MPa (8,700 psi)

Compressive strength

>30 MPa (4,350 psi)

Flexural strength

>20 MPa (2,900 psi)

Tensile strength

>5 MPa (725 psi)

Bond strength | substrate-dependent

Product information

System
Three-layer primer / conductive base / solvent-free epoxy top coat
Total installed thickness
1.5-2.0 mm (60-80 mils)
Application temperature
+10 °C to +35 °C (+50 °F to +95 °F)
Shelf life / storage
18 months in sealed packaging; ≤ +35 °C, dry, shaded and frost-free
Finish
Self-smoothing, gloss; eight listed RAL colour options

FAQ

KREVO Floor EP-AS: questions

What is KREVO Floor EP-AS?

KREVO Floor EP-AS is specified as a three-layer electrostatic-control epoxy flooring system consisting of an epoxy primer, a water-dispersed conductive base coat and a self-smoothing solvent-free epoxy wearing coat. Two grades are specified: conductive (CG) and static-dissipative (DG). The complete floor system is designed for controlled electrical resistance together with a smooth, easy-clean…

What is KREVO Floor EP-AS used for?

KREVO Floor EP-AS is used for: electronic manufacturing and assembly plants; hospitals; clean rooms; chemical handling and processing areas; areas requiring electrical- charge control.

What pack sizes is KREVO Floor EP-AS available in?

KREVO Floor EP-AS is supplied in Epoxy primer 1, 5 and 15 L; functional base coat 4.5 and 18 L; epoxy top coat 17 L.

What is the shelf life of KREVO Floor EP-AS?

Shelf life / storage: 18 months in sealed packaging; ≤ +35 °C, dry, shaded and frost-free.

Is there a technical data sheet for KREVO Floor EP-AS?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Floor EP-AS