Skip to content
Krevo
KREVO Floor EP-Coat
Floor Solutions

KREVO Floor EP-Coat

Solvent-free high-build epoxy floor coating · Chemical and abrasion resistant · Smooth or anti-slip finish

Type
Epoxy Coating
Pack sizes
18 L complete set (specified configuration; confirm supplied unit)
Shelf life
18 months in original sealed containers, dry and shaded, below +30 °C
Technical data sheet

See it applied

Installing an epoxy floor

How KREVO Floor EP-Coat goes on site, step by step.

  1. 1 Pour and spread
  2. 2 Spiked-roller finish
  3. 3 Completed floor

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Floor EP-Coat is specified as a two-component, high-build, solvent-free epoxy coating system designed to produce a dense, durable, decorative finish on prepared concrete floors. The coating provides a protective wearing surface for industrial and commercial environments subject to chemical splashes, mechanical traffic and regular cleaning. It may also be specified for suitable wall substrates.

Advantages

  • High resistance to abrasion, routine impact and a broad range of industrial chemicals.
  • Smooth, easily cleaned finish; a slip-resistant texture can be produced with compatible aggregate.
  • High-build protective coating for floors and suitable vertical surfaces.
  • Suitable for application without a separate primer where substrate condition and adhesion allow.
  • Low-solvent formulation intended for industrial and commercial floor protection.

Typical uses

  • Car park decks
  • Industrial process areas
  • Food, beverage and pharmaceutical facilities
  • Storage rooms and warehouses
  • Stairwells
  • Commercial and industrial floor protection

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Floor EP-Coat

+5 °C to +60 °C

Service temperature

>80 MPa

Compressive strength | ASTM D695

>5,000 MPa

Compressive modulus | ASTM D695

>50 MPa

Flexural strength | BS EN 196

>15 MPa

Tensile strength | ASTM D638

>2 MPa

Bond to concrete | BS 1881

Product information

Chemical base
Two-component, solvent-free epoxy resin system
Finish
Smooth high-build finish; optional broadcast anti-slip finish
Standard application
Two coats, 150-200 µm wet film thickness per coat
VOC content - floor coating
<100 g/L (specified limit)
Colours
RAL 7001, 6029, 7035, 5017, 1001 and 3002; other colours subject to availability
Storage / shelf life
18 months in original sealed containers, dry and shaded, below +30 °C
Abrasion | ASTM D4060, CS17 wheel
41.3 mg loss / 1,000 cycles
Impact resistance | ASTM D2794
No cracking
Static friction | ASTM F609
Smooth: >0.6 dry / >0.6 wet; anti-slip: >0.9 dry / >1.2 wet

Used together with

Epoxy floor system

KREVO Floor EP-Coat is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Primer

  2. 2Floor topping or coating

    KREVO Floor EP-SL Epoxy SL KREVO Floor EP-Coat This product

FAQ

KREVO Floor EP-Coat: questions

What is KREVO Floor EP-Coat?

KREVO Floor EP-Coat is specified as a two-component, high-build, solvent-free epoxy coating system designed to produce a dense, durable, decorative finish on prepared concrete floors. The coating provides a protective wearing surface for industrial and commercial environments subject to chemical splashes, mechanical traffic and regular cleaning. It may also be specified for suitable wall…

What is KREVO Floor EP-Coat used for?

KREVO Floor EP-Coat is used for: car park decks; industrial process areas; food, beverage and pharmaceutical facilities; storage rooms and warehouses; stairwells; commercial and industrial floor protection.

How is KREVO Floor EP-Coat applied?

In outline: 1. Pour and spread 2. Spiked-roller finish 3. Completed floor. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Floor EP-Coat available in?

KREVO Floor EP-Coat is supplied in 18 L complete set (specified configuration; confirm supplied unit).

What is the shelf life of KREVO Floor EP-Coat?

Shelf life / storage: 18 months in original sealed containers, dry and shaded, below +30 °C.

Is there a technical data sheet for KREVO Floor EP-Coat?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Floor EP-Coat