Skip to content
Krevo
KREVO Shield Zinc Primer
Coatings & Linings

KREVO Shield Zinc Primer

Inorganic zinc-rich primer · Galvanic corrosion protection · Industrial & marine steel

Type
Zinc Rich Primer
Pack sizes
1 US gal: 0.75 gal base + 6.6 kg zinc; 5 US gal: 3.75 gal base + 33 kg zinc
Coverage
Approximately 8.2 m²/L at 75 microns DFT
Technical data sheet

See it applied

Priming blast-cleaned steel

How KREVO Shield Zinc Primer goes on site, step by step.

  1. 1 Blast cleaning
  2. 2 Zinc-rich primer

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Shield Zinc Primer is a solvent-based, inorganic zinc-rich protective coating for prepared steel. The zinc-rich film is designed to provide galvanic corrosion protection on structural steel used in industrial, marine and aggressive atmospheric environments. It can be used as a primer or as part of a compatible multi-coat protective system.

Advantages

  • High zinc loading provides sacrificial galvanic protection to suitably prepared steel.
  • Fast handling and curing under suitable ambient humidity and temperature conditions.
  • Suitable for application using conventional or airless spray equipment.
  • Good resistance to corrosion and salt contamination in demanding atmospheres.
  • Can be overcoated with compatible epoxy, polyurethane, acrylic or high-heat systems after appropriate curing.

Typical uses

  • Structural steel and pipe supports
  • Industrial plants
  • Marine and coastal structures
  • Steel under approved fireproofing systems
  • Bridges and exposed fabricated steelwork
  • Tank and equipment exteriors

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Generic type
Solvent-based inorganic zinc-rich steel primer
Appearance / colour
Flat finish; green or grey
Recommended dry film thickness
51–76 microns (2–3 mils) per coat
Maximum recommended DFT
Avoid thickness above 150 microns (6 mils)
Volume solids | ASTM D2697
Approximately 62.3% ± 2%
Zinc dust in dry film
Approximately 85% by weight
Theoretical coverage
Approximately 8.2 m²/L at 75 microns DFT
Salt spray resistance | ASTM B117
43,000 hours without rust, blisters, cracking or delamination in stated test
Slip coefficient | ASTM A325
0.68; Class B test benchmark for suitable faying surfaces
Immersion test | AASHTO M300
650 hours in 5% sodium chloride in stated test
Pencil hardness | ASTM D3363
2H
VOC as supplied | EPA Method 24
Approximately 479 g/L
Maximum untopcoated service
400 °C continuous / 427 °C intermittent
With qualified high-heat topcoat
540 °C continuous / 650 °C intermittent
Corrosion resistance mechanism
Zinc-rich galvanic protection of prepared steel

Used together with

Steel protection system

KREVO Shield Zinc Primer is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Zinc-rich primer

    KREVO Shield Zinc Primer This product
  2. 2Epoxy intermediate coat

  3. 3Polyurethane top coat

FAQ

KREVO Shield Zinc Primer: questions

What is KREVO Shield Zinc Primer?

KREVO Shield Zinc Primer is a solvent-based, inorganic zinc-rich protective coating for prepared steel. The zinc-rich film is designed to provide galvanic corrosion protection on structural steel used in industrial, marine and aggressive atmospheric environments. It can be used as a primer or as part of a compatible multi-coat protective system.

What is KREVO Shield Zinc Primer used for?

KREVO Shield Zinc Primer is used for: structural steel and pipe supports; industrial plants; marine and coastal structures; steel under approved fireproofing systems; bridges and exposed fabricated steelwork; tank and equipment exteriors.

How is KREVO Shield Zinc Primer applied?

In outline: 1. Blast cleaning 2. Zinc-rich primer. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Shield Zinc Primer available in?

KREVO Shield Zinc Primer is supplied in 1 US gal: 0.75 gal base + 6.6 kg zinc; 5 US gal: 3.75 gal base + 33 kg zinc.

What is the coverage of KREVO Shield Zinc Primer?

Coverage / consumption: Approximately 8.2 m²/L at 75 microns DFT. Actual consumption depends on the substrate and application; see the technical data sheet.

Is there a technical data sheet for KREVO Shield Zinc Primer?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Shield Zinc Primer