KREVO Mix PP-Fibre
Polypropylene microfibre for concrete · Plastic shrinkage crack control · Cementitious mixes
- Type
- PP Fibre
- Pack sizes
- 0.6 kg water-soluble bags; 30 bags per box (18 kg)
- Shelf life
- 12 months; unopened, dry, shaded, +5 °C to +45 °C
Overview
KREVO Mix PP-Fibre is a fine, 100% virgin polypropylene microfibre designed for incorporation into concrete, shotcrete and cementitious mixes. The uniformly dispersed fibres help control plastic shrinkage and settlement cracking and improve early-age integrity and surface durability. A surface treatment assists initial dispersion and interaction with the cement paste.
Advantages
- Helps reduce plastic shrinkage and plastic settlement micro-cracking.
- Enhances early-age crack control in concrete and shotcrete.
- Fine, lightweight fibres disperse through a properly mixed cementitious matrix.
- Suitable for hot and tropical climates with appropriate curing practices.
- In shotcrete, may reduce rebound and support thicker single-pass application.
Typical uses
- Ready-mix and site-mixed concrete
- Shotcrete
- Cementitious overlays
- Industrial floor slabs
- Precast patch repairs
- Water-retaining structures
- High-performance concrete
- Tunnel segments
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Mix PP-Fibre
12 mm – 18 mm – 25mm
Nominal fibre length
Approximately 18 µm
Nominal fibre diameter
Approximately +160 °C
Melting point
Product information
- Generic type
- 100% virgin polypropylene microfibre
- Appearance / colour
- Fine, white fibre
- Density at +25 °C
- Approximately 0.91 kg/L
- Shelf life / storage
- 12 months; unopened, dry, shaded, +5 °C to +45 °C
- Recommended dosage
- 0.6 kg/m³ (600 g/m³); confirm by trial mixing
- Primary function
- Control plastic and drying-shrinkage micro-cracking
- Concrete applications
- Normal concrete, high-performance concrete and overlays
- Shotcrete applications
- Crack control; may reduce rebound and pump-line pressure
- Precast applications
- Repair patches and tunnel lining segments
- Water-retaining structures
- Used as mix reinforcement for early-age crack control
- Binder compatibility
- Portland cement, fly ash, GGBS and silica fume systems
- Relevant fibre standard
- EN 14889-2 polymer fibre specification; compliance to be confirmed
FAQ
KREVO Mix PP-Fibre: questions
What is KREVO Mix PP-Fibre?
KREVO Mix PP-Fibre is a fine, 100% virgin polypropylene microfibre designed for incorporation into concrete, shotcrete and cementitious mixes. The uniformly dispersed fibres help control plastic shrinkage and settlement cracking and improve early-age integrity and surface durability. A surface treatment assists initial dispersion and interaction with the cement paste.
What is KREVO Mix PP-Fibre used for?
KREVO Mix PP-Fibre is used for: ready-mix and site-mixed concrete; shotcrete; cementitious overlays; industrial floor slabs; precast patch repairs; water-retaining structures; high-performance concrete; tunnel segments.
What pack sizes is KREVO Mix PP-Fibre available in?
KREVO Mix PP-Fibre is supplied in 0.6 kg water-soluble bags; 30 bags per box (18 kg).
What is the shelf life of KREVO Mix PP-Fibre?
Shelf life / storage: 12 months; unopened, dry, shaded, +5 °C to +45 °C.
Is there a technical data sheet for KREVO Mix PP-Fibre?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Concrete Admix
Crystalline Admix
Concrete Admix
KREVO Mix Crystal
Liquid crystalline waterproofing admixture · Integral concrete protection · Reduced permeability
View product
Superplasticiser
Concrete Admix
KREVO Mix Superplast
High-range water-reducing superplasticizer and retarder · Slump retention · High-quality concrete
View product
Water Reducer
Concrete Admix
KREVO Mix PCE
Polycarboxylate-based high-range water reducer · Slump retention · Flowing & high-performance concrete
View product