Skip to content
Krevo
KREVO Mix Crystal
Concrete Admix

KREVO Mix Crystal

Liquid crystalline waterproofing admixture · Integral concrete protection · Reduced permeability

Type
Crystalline Admix
Pack sizes
200 L drums; 1,000 L bulk containers / tank supply
Shelf life
6 months from production under proper storage
Technical data sheet

Overview

KREVO Mix Crystal is a liquid, integral crystalline waterproofing admixture for concrete and cement mortars. Reactive ingredients interact with moisture and cement hydration products to form insoluble crystalline deposits within capillaries, pores and fine cracks. This reduces water permeability and capillary absorption and can promote the sealing of fine cracks in the presence of moisture.

Advantages

  • Integral waterproofing action throughout the concrete matrix.
  • Reduces water permeability and penetration under hydrostatic pressure.
  • Crystalline reaction can help seal fine cracks in the presence of moisture.
  • Liquid admixture suitable for integration into concrete batching operations.
  • Suitable for hot-climate works with proper concrete placement and curing.

Typical uses

  • Basements and foundations
  • Water tanks and reservoirs
  • Sewage and water-treatment plants
  • Dams, canals and tunnels
  • Harbour and sea- defence structures
  • Retaining walls
  • Precast and cast-in-place concrete
  • Cement mortars and plasters

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Generic type
Liquid crystalline waterproofing admixture
Appearance / colour
Clear to cloudy liquid
Composition
Active liquid chemicals for integral crystalline action
Density at +25 °C
Approximately 1.09 kg/L
Total chloride ion content
Nil (test reference: EN 934-2)
Shelf life
6 months from production under proper storage
Storage conditions
Keep sealed, dry and protected at +5 °C to +50 °C
Recommended dosage
1.0–2.5% by mass of cementitious binder
Ready-mix starting dosage
Approximately 6–7 kg/m³; verify by trial mixes
Reference w/c ratio
Less than 0.50 for watertight concrete design
Mixing after addition
At least 5 minutes for uniform distribution
Effect on setting
Usually minor at suggested dosage; trial to confirm
Fine crack sealing
Up to 0.5 mm as performance target; verify by testing
Exposure / service
Watertight concrete, basements, reservoirs and marine works
Reference category
Crystalline PRAH-type admixture (ACI 212.3R guidance)

FAQ

KREVO Mix Crystal: questions

What is KREVO Mix Crystal?

KREVO Mix Crystal is a liquid, integral crystalline waterproofing admixture for concrete and cement mortars. Reactive ingredients interact with moisture and cement hydration products to form insoluble crystalline deposits within capillaries, pores and fine cracks. This reduces water permeability and capillary absorption and can promote the sealing of fine cracks in the presence of moisture.

What is KREVO Mix Crystal used for?

KREVO Mix Crystal is used for: basements and foundations; water tanks and reservoirs; sewage and water-treatment plants; dams, canals and tunnels; harbour and sea- defence structures; retaining walls; precast and cast-in-place concrete; cement mortars and plasters.

What pack sizes is KREVO Mix Crystal available in?

KREVO Mix Crystal is supplied in 200 L drums; 1,000 L bulk containers / tank supply.

What is the shelf life of KREVO Mix Crystal?

Shelf life / storage: 6 months from production under proper storage.

Is there a technical data sheet for KREVO Mix Crystal?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Mix Crystal