Skip to content
Krevo
KREVO Grout EP
Concrete Repair

KREVO Grout EP

High-temperature, high-strength epoxy grout · Heavy static & dynamic loads · Up to 120 mm

Type
Epoxy Grout
Pack sizes
90.1 kg complete set: 1 resin pail + 1 hardener tin + 3 filler bags
Shelf life
18 months in dry, sealed storage at approximately +20 °C
Technical data sheet

Overview

KREVO Grout EP is a solvent-free, epoxy resin-based, high-strength precision grout developed for machinery bases and structural supports subjected to demanding static and dynamic loads. Its dense cross-linked resin system is designed for elevated-temperature service and resistance to aggressive industrial environments. The resin, hardener and graded filler are combined to form a flowable grout; filler proportion may be adjusted to achieve the required handling consistency under an approved mix design.

Advantages

  • High early compressive strength helps reduce equipment shutdown periods.
  • Designed for heavy, repetitive and dynamic loading with strong adhesion to prepared surfaces.
  • High flexural strength, dimensional stability and low-creep design for precision support.
  • Specified operating-temperature range from −40 °C to +160 °C, subject to system qualification.
  • Good resistance to selected inorganic acids, organic acids, oils and hydrocarbons.

Typical uses

  • High-speed turbines and centrifuges
  • Crane and transporter rail supports
  • Reciprocating machinery
  • Drop forges
  • Heavy equipment foundations and base plates
  • Static and dynamically loaded industrial support systems

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Grout EP

69 MPa

Compressive strength | ASTM C579, 16 h at +40 °C

90 MPa

Compressive strength | ASTM C579, 24 h at +40 °C

110 MPa

Compressive strength | ASTM C579, 48 h at +40 °C

> 45 MPa

Flexural strength | ASTM C580

> 10 MPa

Tensile strength | ASTM C307

20 × 10⁻⁶ / °C

Thermal expansion coefficient | ASTM C531

Product information

Material type
Solvent-free epoxy resin / hardener / graded-filler grout
Formulation
High-density cross-linked epoxy; adjustable filler proportion
Appearance / colour
Dark brown
Recommended grout depth
Up to 120 mm, subject to approved placement and thermal design
Specified service temperature
−40 °C to +160 °C after full cure; qualification required
Theoretical yield
Approximately 45 litres per complete 90.1 kg set
Storage / shelf life
18 months in dry, sealed storage at approximately +20 °C
Compressive strength | ASTM C579, 72 / 96 h at +40 °C
110 MPa
Impact resistance
Greater than concrete (qualitative criterion)

FAQ

KREVO Grout EP: questions

What is KREVO Grout EP?

KREVO Grout EP is a solvent-free, epoxy resin-based, high-strength precision grout developed for machinery bases and structural supports subjected to demanding static and dynamic loads. Its dense cross-linked resin system is designed for elevated-temperature service and resistance to aggressive industrial environments. The resin, hardener and graded filler are combined to form a flowable grout;…

What is KREVO Grout EP used for?

KREVO Grout EP is used for: high-speed turbines and centrifuges; crane and transporter rail supports; reciprocating machinery; drop forges; heavy equipment foundations and base plates; static and dynamically loaded industrial support systems.

What pack sizes is KREVO Grout EP available in?

KREVO Grout EP is supplied in 90.1 kg complete set: 1 resin pail + 1 hardener tin + 3 filler bags.

What is the shelf life of KREVO Grout EP?

Shelf life / storage: 18 months in dry, sealed storage at approximately +20 °C.

Is there a technical data sheet for KREVO Grout EP?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Grout EP